Parking Counter System with auto-correction
The Parking Counter System can guide cars to empty parking spaces in parking lots. However, our system provides different results than common counting systems through two-step automatic calibration.
[ Features of car parking counter system with two-step calibration. ]
Parking Counter Software with two-step calibration
The parking counter software counts the number of empty parking spaces. However, the Parking counter system with a second automatic correction function keeps accurate information.
Wireless Zone Controller with two-step calibration
The controller of the car parking counting system receives the car count from the sensor module. However, our Zone Controller has automatic calibration to determine if it is a real car.
Sensor module for parking lot counting system
The sensor module of the parking lot detects and sends the car passing. However, the Zone Controller of the parking lot counting system first determines whether this is a real car.
Entire Parking Display Board for parking count system
The Entire Parking Display displays the number of empty parking spaces on each floor in real time. Moreover, we can display the block or floor in the parking count system.
[ Parking Counter Software with auto-correction ]
Our parking counter system can guide cars by displaying empty parking spaces in indoor or outdoor parking lots.
So, when the manager installs this system in indoor parking, it is common to guide the parking spaces by floor.
But, if the indoor parking lot is large, it is possible to divide the spaces by block and guide it.
Especially, this parking counter system has a function to increase reliability in two stages, so it can maintain high accuracy.
Therefore, this parking guidance software can go beyond a simple counter and analyze whether the count is correct.
So, this software can receive the car count value from the I/O controller and controls the display boards.
Moreover, our parking counter system can display disabled parking by installing sensors on the disabled parking bays.
- Also, the parking counter software can check the operating status of connected devices.
[ Wireless Zone Controller with auto-correction ]
The Wireless Zone Controller is a key device of the car parking counting system and communicates with the guidance computer.
Thus, the device can receive signals from the car sensors and display empty parking spaces on the display board.
So, the Wireless Zone Controller sends the detection signals to the computer and the parking information to the display boards.
However, this Zone Controller analyzes first before sending detection signals to check whether it is a normal car detection.
So, this car parking counter system performs two-step automatic calibration to maintain accurate data.
Also, by adding a wireless device to this device, the installation cost of the parking counter system can be reduced.
But additional repeaters may be required if there is an obstacle between the two devices that need to communicate.
In addition, the device can receive up to 16 input signals to count passing or occupied cars.
Also, it has two communication ports to connect the display panel displayed in the parking counter system.
[ Sensor Module ]
The sensor module used in the parking lot counting system can be divided into a ceiling sensor and a loop coil type.
Therefore, we can mainly use laser sensors or magnetic sensors as a ceiling sensor for the parking counter system.
So, we can recommend that ceiling–type sensors be installed mainly in indoor parking lots with ceilings.
However, we mainly recommend using the loop coil type car detector as a sensor module for outdoor parking lots.
Therefore, the installer installs the loop coil for the parking counter system, the passing cars can be detected.
So, the installer connects the output signals of these sensors to the Zone controller to count the passing cars.
Also, the loop coil type car detector or sensor module must be reliable without malfunction.
Furthermore, we will separately guide you on how to install the devices required for the parking counter system.
[ Entire parking display board - stand type ]
The driver can check the parking count values on the entire parking display at the entrance of the parking lot.
So, when the driver approaches the parking lot, the entire spaces are displayed to guide the parking spaces.
Also, the driver can check the entire empty spaces of the parking counter system and decide where to go.
Moreover, the block name and arrow are displayed on this display board so that the drivers can easily check it.
Also, the installer can set the Entire parking display board to be displayed for each floor or block.
Moreover, we use high-brightness LED modules, so that the driver can see even when the device is in sunlight.
Additionally, operators can set what to display on this device as text instead of numbers.
So, the parking counter system can display up to 4 characters in English when it is displayed in characters.
[ Ceiling type block guidance display ]
Our parking count system can guide cars by displaying empty parking spaces on the Block guidance display.
So, the installer mainly uses the ceiling type when installing the Block guidance Display in the indoor parking lot.
Also, if this device of the parking counter system is a double-sided, drivers on both sides can see it.
In addition, this device can guide the number of vacant parking spaces by floor or block in the parking lot.
So, the driver can check the parking information of nearby and other area on the ceiling type Block guidance display.
Also, the installer can set the display board in 2 or 3 directions depending on the parking lot conditions.
Moreover, if we offer this device as a double-sided, you can see it from front and back as well.
Therefore, this device installed for the parking counter system can guide the cars to an empty parking space.
[ Stand type block guidance display ]
We mainly use stand type block guidance display for parking counter system in outdoor parking lots.
In other words, this guidance display can guide empty parking spaces in a nearby block and another block.
Also, the Block guidance display usually displays 2 directions, but other directions are also possible for the parking counter system.
Moreover, the LED module of this stand type block display automatically adjusts the brightness according to the day and night.
Also, we use the LED module used in this device with 128 x 512mm, and it can also display characters.
Moreover, since the display device of the parking counter system uses a high-brightness LED, it can be checked from a distance.
Therefore, this device receives empty parking spaces from the Zone controller and display it on the LED module.
In addition, our parking count system can configure a Block Parking Display that can check parking spaces from three sides.