Parking Counter System with two-step calibration

The Parking Counter System with two-step automatic correction function is also applied to outdoor and indoor parking lots.

[ Traffic software ]

  • The Traffic Software of the parking counter system can be set according to the installed parking lot.
  • So, the guidance system can be configured according to the shape of an indoor or outdoor parking lot.
  • In addition, the Traffic Software receives the vehicle count signal from the I/O Controller and controls the display boards.
  • Moreover, this Traffic Software is not a simple counter, but has a function to analyze whether the count is correct.
  • So, the parking counter system can accurately display empty spaces with a two-step automatic correction function.
  • Also, our guidance system can display empty spaces for the disabled by installing sensors on the parking bays.
  • For reference, if the parking area on the same floor is wide, it can be divided into several blocks.
  • Classification by block /floor : up to 20 blocks or floors
  • Communication method        : RS-485 or Wireless
  • Required the computer           : Latest specifications
  • Operating System                    : Windows 10
  • Operating temperature           : 0°C ~ +50°C
  • Input power                               : AC 110V ~ 230V, 50/60Hz
  • Internet connection                : Required
Play Video

[ Radio I/O controller ]

  • The I/O Controller, one of the key devices of the parking counter, communicates with the Traffic Computer and exchanges data.
  • Also, the I/O Controller receives signals from the detectors and displays empty parking spaces on the display boards.
  • Then, the I/O Controller sends the detection signals to the computer and the parking information to the display boards.
  • However, before sending the detection signals, the I/O Controller analyzes it and checks whether it is normal detected.
  • Therefore, this I/O Controller serves a the first step in the two-step automatic calibration that keeps accurate data.
  • Also, by adding a wireless module to the I/O Controller, the parking counter can be installed at a lower cost.
  • However, an additional repeater may be required if there are any obstacles between the two devices that need to communicate.
  • Input signal ports               : up to 16 ports
  • Applicable parking lot       : Indoor or Outdoor parking lot
  • Vehicle classification        : regular parking lot, disabled parking bays
  • Communication ports       : RS-485 x 3ea (Traffic computer, display boards)
  • Radio module frequency   : 917~923 Mhz
  • Communication distance : Max. 20Km (at open air)
  • Operating temperature      : -20°C ~ +60°C
  • Input power                          : AC 110V ~ 230V, 50/60Hz

[ Sensor modules ]

  • The sensor used in the parking counter system is divided into a ceiling sensor and a loop coil type.
  • That is, the ceiling type uses a laser sensor or a magnetic field sensor and is mainly installed on the ceiling.
  • Also, the loop coil type vehicle detector or sensor module must be reliable without malfunction.
  • We will guide later on how to install the devices required for the parking counter system.
  • [ Laser sensor module ]
  • Installation type : Ceiling type
  • Usage                    : Indoor parking lot
  • Sensor module   : laser sensor 2pc
  • Input power         : DC12V
  • Output                   : open collector contact
  •  [ Loop coil detector ]
  • Loop coil       : sealed in the floor
  • Use                 : Outdoor parking lot
  • Input power : AC110V/220V, 50/60Hz
  • Output           : Relay dry contact

[ Entire parking display board - stand type ]

  • An Entire Display Board of the parking counter system is installed at the entrance to display the overall parking status.
  • So, the information of the entire blocks or floors are displayed on the device so that it can be checked.
  • In addition, the name of the parking lot and arrow are displayed on this display board to guide the drivers.
  • Empty parking spaces are displayed with a high-brightness LED module, so you can check it even under sunlight.
  • Also, at night, it automatically adjusts the brightness of the light to eliminate blurring, so clear text is always displayed.
  • Moreover, it is possible to set the parking spaces of the parking counter system to be displayed as text.
  • Module size                         : 128 x 256mm high-brightness LED module
  • Display contents                : 4 digits numbers, 4digits English text
  • Character display              : free, jam, full
  • Communication method : RS-485
  • Dimension                           : 560(W) x 1,500(H) x 140(D)
  • Operating temperature    : -20°C ~ +60°C
  • Input power                        : AC 110/220V, 50/60Hz

[ Block parking display board - ceiling type ]

  • The Block Display Board of the parking count system can be installed on the ceiling of the block or floor.
  • In other words, parking information of a nearby block and another block can be displayed on the Block Display.
  • Also, the Block Display Board can be set in 1, 2 or 3directions according to the parking lot conditions.
  • Additionally, it can be configured for one-way or two-way and can be viewed from the front and rear.
  • So, the Block Display Board installed for the parking count system can guide the vehicles to empty parking spaces.
  • Installation type              : ceiling type
  • Module size                      : high-brightness LED module 128 x 256mm
  • Display contents             :  4 digits numbers or 4digits English text
  • Character display           : free, full jam
  • External size                   : 1,200(W) x 188(H) x 140(D)mm
  • Operating temperature : -20°C ~ +60°C
  • Input power                     : AC 110/220V, 50/60Hz

[ Block parking display board - stand type ]

  • The self-supporting Block Display Board for parking count is mainly used in outdoor parking lots.
  • So, this Block Display Board guides the number of vacant parking spaces in the nearest block and other block.
  • In addition, the Block Display Board usually displays two directions, but one or three directions are also possible.
  • And the LED module of the Block Display Board automatically adjusts the brightness according to the day and night.
  • Furthermore, it is possible to configure Block Display Boards that can check parking spaces from three sides.
  • Installation type              : self-standing
  • Module size                      : high-brightness LED module 256 x 128mm
  • Display contents             : number 4digits
  • Character display           : full, free, jam
  • Dimension                       : 350(W) x 1,500(H) x 140(D)mm
  • Operating temperature : -20°C ~ +60°C
  • Input power                     : AC 110/220V, 50/60Hz

Case studies

we had installed parking management systems of over 4,000 sites for about 30 years

Our Car Parking Solutions

Parking Guide System with two-step calibration

Request a quote

Let's talk about your project