Non-loop coil Vehicle Detector
This vehicle detector, which operates without a loop coil using geomagnetic technology, detects passing vehicles, forklifts, carts or metal and alerts pedestrians or drivers nearby.
Features of non-loop coil Vehicle Detector
The existing loop coil vehicle detectors are inconvenient to install because the loop coils must be installed in the pathway.
This vehicle detector detects passing vehicles and metals by installing sensors on walls or ceilings without loop coil.
The Vehicle detector with loop coil detects vehicles from both the front and behind the sensor.
The vehicle detector detects passing vehicles within 3 meters away from the sensor.
[ 1CH- Non loop coil Vehicle Detector (model : GVD-3S) ]
Detects vehicles without loop coil for 1 channel.
Detection direction : Detects vehicles from front and rear side of the sensor
Output : 1 channel AC 70~240V control, relay dry-contact.
Components : 1 detection device, 1 sensor
Bulk order : Discount will be applied)
[ 1CH assembled- Non loop coil Car Detector (model : GVD-3SC) ]
Detects vehicles without loop coil by 1 channel assembled vehicle detector.
Detection direction : Detects vehicles from front and behind the sensor
Convenient installation provided with circuit configuration in waterproof ABS housing.
Output : 1 channel control – AC 70~240V, dry contact relay.
Components : 1 detection device, 1 sensor, adapter, ABS housing and circuit configuration.
Bulk order : Discount will be applied
[ 2CH Non-loop coil Vehicle Detector (model : GVD-3D) ]
Detect passing vehicles without loop coil.
Detection direction : Detects vehicles from front and behind the sensor
Provides direction determination or priority detection function
Output : 2-channel control AC70~240V, dry-contact relay
Components : 1 detection device, 2 sensors
Bulk order : Discount will be applied
[ 2CH assembled- Non loop coil Car Detector (model : GVD-3DC) ]
It’s 2-channel assembled- vehicle detector without loop coil.
Detection direction : Detects vehicles from front and behind the sensor
Convenient installation provided by circuit configuration in waterproof ABS housing.
Components : 1 detection device, 2 sensors, adapter, ABS housing, and circuit configuration.
Bulk order : Discount will be applied
[ Metal Sensor without loop coil (model : SGL-5) ]
It can detect approaching vehicles and control LPR devices, parking ticket machines, garage doors, or parking barriers.
It detects only vehicles approaching the front of the metal sensor and activates the output.
The metal sensor can detect when a person approaching at close range is carrying a weapon such as a gun or bayonet.
Detection direction : Only front side of the sensor
Detection distance : within 3 meters
Components : 1 sensor, 1 AUX board
Bulk order : Discount will be applied
[ Metal Sensor without loop coil (model : SG-5) ]
It can detect vehicles or metal objects approaching the front and behind the metal sensor, and activate warning lights or alarm lights.
When installing this model, you should check the installation location as moving vehicles or metals.
It can detect approaching vehicles, carts, forklifts, etc. for security and safety purposes in parking lots, factories, etc.
Detection direction : Front and behind the sensor
Detection distance : Within 3 meters
Components : 1 sensor, 1 AUX board
Bulk orders : Discount will be applied
[ Microwave Sensor (model : SL-5) ]
This model is a sensor using microwave technology that detects all objects such as vehicles, pedestrians, and animals.
This model detects at an exact point when the detection distance is set, only detects at the front of the sensor.
Detection direction : Only front side of the sensor
Detection distance : within 7 meters
Components : 1 sensor, 1 AUX board
Bulk order : Discount will be applied
[ 2 CH- Vehicle Detector with loop coil (model : DT-L202) ]
The loop coil type vehicle detector detects passing vehicles by loop coil installed in the road surface.
The 2-channel detector can be used individually, but can also be used for priority detection or direction determination.
Detection method : Loop coil type
Output : AC 220V control and relay contact output
Power supply : AC 220V
Components : 1 vehicle detector
Bulk order : Discount will be applied
[ 1 CH- Vehicle Detector with loop coil (model : DT-L102) ]
Connect the loop coil installed in the road surface to the vehicle detector to detect the vehicle.
Output : AC 220V control and relay contact output
Power supply : AC 220V
Components : 1 vehicle detector
Bulk order : Discount will be applied
[ Accessories ]
Adapter: DC12V power supply for sensor
Sensor pole (small): Aluminum material and angle adjustable (height: 250mm).
Sensor pole (Midum): assembled sensor using a bracket (height: 634mm).
Bracket : 90 x 150 x 3mm (plate type)
Bracket : 133 x 50 x 100mm (Adjustable)
[ Warning Light and Signal ]
2 color- Traffic light (wall, ceiling) : Red, Green 125mm Lamp
2 color Traffic light (stand) : Red, Green 125mm Lamp & Warning
Warning light (ceiling) : 125mm lamp
Warning light (wall) : 125mm lamp & Bracket
Warning light ( stand) : 125mm lamp & warning letter display
Voice Warning light (wall) : 15W, 130dB
Case studies
We had installed parking management systems at thousands of sites over a period of nearly 30 years.
Our Business Scopes
LPR Parking System, Parking Counter System, Non-loop coil Vehicle Detector, Metal Sensor
Request a quote