[ Slave LPR camera (model : DLR-600) ]
This device is installed at the entrance or exit of the parking lot to capture the other side of the front license plate or the rear license plate to improve the LPR rate.
The Slave LPR camera can be installed to capture the rear license plate of the vehicle and is mainly applied at the entrance side.
However, this Slave LPR camera is installed at the entrance to capture the front license plate, but it is used to capture vehicles entering from a different angle.
Or it is used to capture the front license plate of the vehicle from a different angle to ensure a clear license plate recognition before the vehicle exits.
[ Application examples ]
When a vehicle is turning and entering a lane, it is necessary to capture images of the front license plate from a different side.
Rear license plate images should be captured when the front license plate is bent or covered with snow.
In countries where front license plates are not required, rear license plates must be captured.
[ Detail descriptions ]
When reading the car number from LPR parking system, it is mainly processed by reading front number of the car.
However, operators need this device because sometimes it is not possible to process by reading only the front number plate.
In other words, LPR parking system cannot read the car if there is snow or mud on the front number plate.
Also, if the front plate is in bad condition or there is no front plate, you will need a rear camera.
Therefore, users can increase the number reading rate by installing the Slave LPR Camera of the LPR parking system.
So, the Slave Camera sends the captured image to the front LPR Barrier so that the two images can be compared.
Also, the IPU and ABCS function control the slave camera to support operation for reading the rear number.
In other words, our LPR parking system have a function to handle the difference between the two car number readings.
Our Business Scopes
LPR Parking System, Parking Counter System, Non-loop coil Vehicle Detector, Metal Sensor
